2006 Chrysler Sebring Replace Air Filter

From WikituneUp - The Free Service Manual
Jump to: navigation, search

The 2006 Chrysler Sebring uses an engine air filter to prevent dust and particles from entering the engine air intake system. Debris or dust entering the engine can cause damage and decrease engine performance. Chrysler recommends replacing the air filter in the 2006 Sebring once every 30,000 miles under normal driving conditions. If you drive your Sebring in dusty conditions on a regular basis, you should inspect the air filter frequently and replaced when it appears clogged or plenty dirty.

[edit] Tools Used

Tools
New air filter

[edit] Replace Air Filter

  • Turn off the Sebring's engine. Open the car hood.
  • Locate the air filter housing compartment on the driver's side of the engine compartment.
  • Unsnap the four spring clips around the edges of the housing lid.
  • Lift the air filter housing lid off the filter housing.
  • Remove any debris from the housing interior. Wipe the housing clean with a damp cloth.
  • Place the new filter inside the air filter housing.
  • Replace the filter housing lid. Close the spring clips to hold the lid in place.
Personal tools
Namespaces

Variants
Actions
Navigation
Interaction
Toolbox