1994 Jeep Grand Cherokee Laredo Fix Running Lights

From WikituneUp - The Free Service Manual
Jump to: navigation, search

Some models of the 1994 Jeep Grand Cherokee Laredo come equipped with a set of running lights; the running lights are mounted in the front bumper. On a vehicle such as the Grand Cherokee, these lights serve as a way to increase visibility, especially if the owner chooses to go off-roading or engage in other such activities that may require increased lighting power. Having running lights that don't work can prevent you from being able to do drive in these conditions. For that reason, it is imperative to replace the the bulbs on the running lights as soon as they no longer work.

[edit] Tools Used

Tools
Screwdriver

[edit] Fix Running Lights

  • Open the hood and disconnect the negative (black) battery cable from the battery terminal.
  • Remove the two screws on the back of the running light, using a screwdriver. You will have to get underneath the front bumper to access these screws.
  • Unscrew the screw at the front of the running light with a screwdriver.
  • Gently pull out the running light.
  • Disconnect the wiring harness by pressing on the tabs and then pulling on the harness.
  • Twist the rubber end on the back of the running light counter-clockwise, then pull it out to expose the bulb.
  • Screw off the bulb and replace it with the new one.
  • Place the bulb back into the running light and twist the rubber end to secure it in place.
  • Push the wiring harness back into the the running light and slide the running light back into the bumper.
  • Secure the running light in place by reattaching all three of the screws you removed earlier.
  • Reconnect the negative (black) cable to the battery terminal.
Personal tools
Namespaces

Variants
Actions
Navigation
Interaction
Toolbox